GZBtech 120V LED Strip Lighting: Affordable & Discreet Ambiance Solutions
Table of Contents
- Why Choose 120V LED Strip Lights?
- Key Features & Specs
- Safety & Warranty
- Installation Guide(Cutting & Powering & Waterproofing for Durability)
- Troubleshooting
- Customer Support
1. Why Choose 120V LED Strip Lights?
GZBtech’s 120V LED strip lights deliver exceptional value for hidden lighting projects. Perfect for creating seamless ambiance, they offer:
- High Voltage, Low Cost: Eliminate the need for pricey transformers.
- Discreet Design: Ultra-thin profile for hidden installations in coves, shelves, or under cabinets.
- Vivid Illumination: 331 lumens/meter for rich, even lighting.
- Easy Customization: Cut every 0.5 meters (1.6 feet) to fit any space.
2. Key Features & Specifications
| Voltage | 120V |
| Power Consumption | 3.88W per meter |
| Brightness | 331 lumens/meter |
| Color Options | Warm White (2800K), Cool White (6000K) |
| Max Run Length | 128 feet (39 meters) |
| IP Rating | IP65 (splash-resistant) |
| Certifications | ETL Listed |
Included Accessories:
- Power cords with fast connectors
- L-shape connectors, jumper cables
- Heat shrink tubing & end caps
3. Safety & Warranty
⚠️ Critical Warnings:
- Do not cover lights—risk of overheating.
- Unroll fully before use—coiled strips may melt.
- Avoid water submersion—connections are non-waterproof.
🔧 Warranty:
- 1-Year Coverage: Defects in materials/workmanship.
- 1-Month Full Refund: No-questions-asked returns.
4. Installation Guide
Cutting & Powering
- Turn off the power.
- Cut only at 0.5-meter marks (marked with scissors symbols).
- Connect pins to the strip’s “+” polarity mark.
- Attach the power cord/dimmer controller and test.
Pro Tip: Flip the connector 180° if the lights don’t turn on initially.
Waterproofing for Outdoor Use
- Apply silicone adhesive to exposed connections.
- Seal joints with heat-shrink tubing using a heat gun.
- Let cure for 24 hours before use.
5. Troubleshooting
| Issue | Solution |
|---|---|
| Lights Not Turning On | Check the 120V outlet and polarity alignment. |
| Partial Dimming | Secure loose pin connections. |
| Flickering | Replace the damaged power cord. |
| Water Damage | Reapply silicone sealant to joints. |
6. Customer Support
For assistance or bulk orders:
Website: www.gzbtech.com
Email: info@gzbtech.com
