GZBtech 3D FREE BEND NEON Flex: Ultimate Installation & Application Guide
Table of Contents
- Why Choose Free Bend Flex Neon?
- Key Specifications
- Safety & Warranty
- Installation Guide
- Cutting & Bending Techniques
- Waterproofing for Outdoor Use
- Applications & Limitations
- Troubleshooting
- Customer Support
1. Why Choose Free Bend Flex Neon?
GZBtech’s 3D Free Bend Flex Neon redefines flexibility for large-scale projects. Perfect for bold, creative designs, it offers:
- Dual-Direction Bending: Achieve top bends and side bends effortlessly for dynamic 3D shapes.
- High Durability: Engineered for architectural facades, landscape installations, and store signage.
- IP65 Water-Resistant: Withstands outdoor exposure (non-submersible).
- Quick Customization: Cut every 10 cm (3.9 inches) to tailor lengths.
⚠️ Not recommended for intricate, small-scale designs requiring precision.
2. Key Specifications
| Voltage | 120V |
| Power Consumption | 100W per hour |
| LED Type | 9400A35 High-Output |
| Max Run Length | 25 meters (82 feet) |
| Cutting Interval | Every 10 cm (3.9 in) |
| Applications | Building facades, landscape art, commercial signage |
3. Safety & Warranty
⚠️ Critical Warnings:
- Avoid sharp-angle bends—maintain smooth curves to prevent wire damage.
- Unroll fully before use—coiled lights risk overheating.
- Do not submerge—use waterproofing kits for outdoor durability.
🔧 Warranty:
- 1-Year Coverage: Defects in materials/workmanship.
- 1-Month Full Refund: Hassle-free returns.
4. Installation Guide
Cutting & Bending Techniques
- Turn off the power.
- Cut only at 10 cm marks (marked with black indicators).
- Bend freely:
- Top Bend: Create arches or waves for facades.
- Side Bend: Shape lateral curves for landscape contours.
4. Seal ends with waterproof end caps and test lights.
Note: Cutting voids in certifications. Use sharp tools for clean cuts.
Waterproofing for Outdoor Use
- Apply silicone adhesive to connections.
- Cover joints with heat shrink tubing and seal with a heat gun.
- Let the adhesive cure for 24 hours for maximum protection.
5. Applications & Limitations
Ideal For:
- Architectural Facades: Highlight building outlines with bold curves.
- Landscape Art: Design sweeping garden or park installations.
- Store Signage: Create eye-catching 3D logos.
Not Recommended For:
- Fine Detailing: Small, intricate patterns may strain the flex.
- Submersion: Avoid pools or underwater use.
6. Troubleshooting
| Issue | Solution |
|---|---|
| Lights Not Turning On | Verify 120V outlet and secure connections. |
| Partial Dimming | Check for loose pins or damaged wires. |
| Bending Failures | Avoid sharp angles; use gradual curves. |
| Water Damage | Reapply silicone sealant to joints. |
7. Customer Support
For assistance or bulk orders:
- Website: www.gzbtech.com
- Email: info@gzbtech.com
